Want this question answered?
The crankshaft position sensor is located at the front of the engine close to the crankshaft damper
The crank sensor is located at the left front of the engine
the crank position sensor is located in front of the oil filter on the left side of the engine in front.
The crank position sensor is on the front of the engine. It is behind the crank pulley on the left side.
it is on the front timing. near botton of crank pulley.
lower right front of the engine
it will be on the lower front of the engine even with the crankshaft
It's at the front of the engine. The engine sits sideways in the engine bay. The front is looking towards the engine from the right front fender. The crank sensor is at the 10 O'clock position of the crankshaft pulley. It is a rounded sensor pointing towards the teeth on the backside of the crank pulley. It picks up a magnetic signal from the crank pulley and turns it into about a 2 volt sending signal to the computer. Due to the low voltage it is good to check and clean all the wiring on the crank sensor with carburetor cleaner or alcohol.
The crank position sensor is located on the front of the engine, behind the lower crank pulleys.
First and formost be sure it is the cranksensor that needs replacement coz there is another sensor called knock sensor. Crank sensor is located near to the engine front pulley. Knock sensor is on the side of engine
The crank shaft sensor is located on front of block above the harmonic balance wheel (bottom pulley on front of engine). This is easiest to get at from underneath the vehicle.
Up in the front of the engine where the timing cover is on the right side of it this will be the cam sensor it does not have a crank sensor.