0
As you are studying resistant materials. I would recommend decorating the cover with different materials or products. You may want to use this to create a 'mood board'.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What shall I draw on my Philosophy and Ethics book I have a tiny orange book that I do some of my philosophy and ethics work in and I want to decorate it to do with the subject?
you could decorate your book with your favourite religion.
What shall you do to minimise solid waste materials?
What shall you do to minimise solid waste meterials?
Shall idelete all the dll files in the system folder which you have sugested before?
delete all dll files you do not need them
Floor outlet fixtures shall be secured to the floor or floor flanges by screws or bolts of what kind of materials- Copper or Brass or Corrosion-resistant or any of the above?
any of the above. Brass usually for decorative fixtures, steel or plated screws for utility, usually round head countersunk & Phillips
What are JIS7 standards?
JIS SCALEIcom Product Water ResistanceThe Japan Industrial Standards (JIS) for water resistance uses a "0" to "8" scale to define the level of water ingress protection built into each product. If the product was tested in compliance with this standard it is usually listed on the product spec sheet. The various JIS classes are defined below.JIS "0"No special protectionJIS "1"Vertically dripping water shall have no harmful effect (Drip resistant 1)JIS "2"Dripping water at an angle up to 15 degrees from vertical shall have no harmful effect (Drip resistant 2)JIS "3"Falling rain at an angle up to 60 degrees from vertical shall have no harmful effect (Rain resistant)JIS "4"Splashing water from any direction shall have no harmful effect (Splash resistant)JIS "5"Direct jetting water from any direction shall have no harmful effect (Jet resistant)JIS "6"Direct jetting water from any direction shall not enter the enclosure (Water tight)JIS "7"Water shall not enter the enclosure when it is immersed in water under defined conditions (Immersion resistant)JIS "8"The equipment is usable for continuous submersion in water under specified pressure (Submersible)
What is secured advance?
Secured Advance on Materialsa) The Contractor shall be entitled to receive from the Employer Secured Advance against an indemnity bond acceptable to the Employer of such sum as the Engineer may consider proper in respect of non-perishable materials brought at the Site but not yet incorporated in the Permanent Works provided that:(1) The materials are in accordance with the Specifications for the Permanent Works;(2) Such materials have been delivered to the Site and are properly stored and protected against loss or damage or deterioration to the satisfaction of the Engineer but at the risk and cost of the Contractor;(3) The Contractor's records of the requirements, orders, receipts and use of materials are kept in a form approved by the Engineer, and such records shall be available for inspection by the Engineer;(4) The Contractor shall submit with his monthly statement the estimated value of the materials on Site together with such documents as may be required by the Engineer for the purpose of valuation of materials and providing evidence of ownership and payment therefor;(5) Ownership of such materials shall be deemed to vest in the Employer and these materials shall not be removed from the Site or otherwise disposed of without written permission of the Employer; and(6) The sum payable for such materials on Site shall not exceed 75 % of the (i) landed cost of imported materials, or (ii) ex-factory / ex-warehouse price of locally manufactured or produced materials, or (iii) market price of other materials.(b) The recovery of Secured Advance paid to the Contractor under the above provisions shall be effected from the monthly payments on actual consumption basis.
What shall be the Pipe support materials inside water tank?
Copper / brass /some people opt for gavlanized
Is it illegal to sell a used mattress in Colorado?
No, it is not illegal to sell a used mattress in Colorado. However, sellers are required to follow certain guidelines to ensure the mattress is clean and properly labeled with information like whether it is used or refurbished. It is also recommended to check local regulations for any specific requirements.
What is free issue materials?
Whensoever, there is a contract between two parties; the Employer and the Contractor then if the contract necessitates that the Employer shall supply part of the materials so that the seller can use the same to carry out, and complete, its work under the contract; we call the said materials "Free-Issue materials".
Why is a hockey puck bounce resistant?
The puck is not bounce resistant, but bouncing is controlled because they freeze them prior to-and during the games. A warm (or room temperature) puck will bounce as it is rubber, however, once frozen, rubber loses its tendency to bounce. According to Rule 24 concerning pucks in the NHL rulebook: "The home Team shall be responsible for providing an adequate supply of official pucks which shall be kept in a frozen condition. This supply of pucks shall be kept at the penalty bench under the control of one of the regular Off-Ice Officials or a special attendant."
What is the difference between Static Dissipative Shoes and Conductive Shoes?
My interpretation of the text below is that conductive is the safest option for electronics and explosives, while ESD provides some protection for the wearer from being shocked by high voltage equipment, but because of this, it allows the wearer build up a higher charge then the conductive style (due to the difference in resistivity). from ASTM F2413... 5.4 Conductive Protective Footwear: 5.4.1 Conductive footwear shall also meet the requirements of 5.1 for impact resistant footwear and 5.2 for compression resistant footwear. 5.4.2 Footwear shall be designed, constructed, and manufactured to provide protection for the wearer against hazards that may result from static electricity buildup and to reduce the possibility of ignition of explosives or volatile chemicals. 5.4.2.1 Footwear shall dissipate static electricity from the body to reduce the possibility of ignition of volatile compounds. 5.4.2.2 Footwear shall be of a construction that facilitates a stable electrically conductive path. All external components shall be made of nonferrous materials. 5.4.2.3 Conductive footwear is not designed to be worn by personnel working near open electrical circuits. 5.4.3 The workmanship in the production and assembly of the footwear shall ensure that the footwear provides functionality to the wearer. 5.4.3.1 The uppers shall be made of materials that facilitate the dissipation of static electricity. 5.4.3.2 The insoles, linings, outsoles, and heels of the footwear shall be made of any combination of materials and compounds which will facilitate electrical conductivity and the transfer of static electricity build up from the body to the ground. 5.4.3.3 The recommended design of the outsole and heel is a single unit. Where the outsole and heel are separate components, the following practices shall be used. (1) Heel shall be attached to outsole to ensure no disruption in electrical conductivity. (2) Non-ferrous heel nails shall be used to attach the heels when heel nails are used. These nails shall be recessed within the tread surface and then covered with conductive material. These nails shall not be either exposed or visible. 5.4.4 Electrical resistance shall be determined by evaluating the minimum number of specimens per lot size in accordance with Test Methods F 2412. 5.4.4.1 The specimens shall demonstrate resistance between 0 to 500 000 ohms. 5.4.4.2 Any specimen or sample of conductive footwear that does not meet the performance requirement constitutes a failure for the lot. 5.6 Static Dissipative (SD) Footwear: 5.6.1 Static dissipative footwear shall also meet the requirements of 5.1 for impact resistant footwear and 5.2 for compression resistant footwear. 5.6.2 Static dissipative footwear shall be designed, constructed, and manufactured to provide protection to the wearer against hazards which may exist due to excessively low footwear resistance in a work environment, as well as maintain a sufficiently high level of resistance to reduce the possibility of electrical shock in work areas where SD footwear is worn. 5.6.2.1 Footwear shall reduce the excess static electricity by conducting the charge (from body) to ground while simultaneously maintaining a sufficiently high level of resistance (106 ohms) (1 megohm) to protect the wearer when exposed to hazards from incidental contact with live electric circuits. 5.6.2.2 Using human subjects, a pair of footwear shall have a lower limit of electrical resistance of 106 ohms (1 megohm) and have an upper limit electrical resistance of 108 ohms (100 megohms). 5.6.3 The workmanship in the production and assembly of the footwear shall ensure that the footwear provides functionality to the wearer. 5.6.3.1 The footwear shall use any combination of materials that facilitate static dissipation by a consistent path of resistance. 5.6.3.2 The inconsistency of certain hygroscopic materials can result in footwear not being able to consistently meet the performance requirements of static dissipative footwear. 5.6.3.3 Heels shall be attached using non-ferrous heel nails. These nails shall be recessed within the tread surface and then covered with conductive material. These nails shall be neither exposed nor visible. 5.6.4 Static dissipation shall be determined by evaluating the minimum number of specimens per lot size in accordance with Test Methods F 2412. 5.6.4.1 Any specimen that does not meet the performance requirement constitutes a failure for the lot.
What is the future of was?
I shall be You shall be He/She shall be We shall be You shall be They shall be
