0
What else can I help you with?
What should I know before having my brakes repaired?
Understand what work will be performed. Also make sure you know how much it will cost.
If your having brake failure what should you do?
Have them repaired immediately by a professional.
If the clutch in a car is burnt out could it be repaired?
Absolutely. You drop the engine, unbolt the old clutch, bolt in the new one...put the engine back in the car and adjust the clutch pedal. The details are a little more than that, but on a Bug you should be able to do it in a day if you've never done one before. If you have done one before, a quiet Saturday morning will more than cover it.
What is the cause of automatic transmissions skipping gear?
Lack of transmition fluid can be the problem if not it should be taken to a mechanic for checking before it brakes. having a transmition repaired is a costly deed.
Should high pressure hoses and fittings be repaired before replacing them?
False (no)
How do you know when the clutch master cylinder is gone in a 1995 escort?
Whenever you are having a problem with the clutch disengaging the engine from the transmission it is advisable to bleed the clutch slave cylinder. If the clutch can't be operated by bleeding the slave cylinder then the clutch master cylinder is gone and should be replaced.
Can burning clutch overheat the car?
no, but if you are burning your clutch i recommend having someone teach you how to drive a standard, you should never burn your clutch unless you are going up a very steep incline where you can't let it out quickly
Should you get brakes repaired before you buy new tires?
Yes, that sounds like a good idea -
How do you crank a car if the clutch is out?
Odd question! Out? If you mean blown, or burnt out, use the key and starter. It should make no difference except you can't go anywhere. If you mean out, as in, push in the clutch pedal. This is how you should always start your car. You may be having a problem with the safety switch on the clutch pedal. Most cars have had these since 1969! You may be having some other problem. The biggest problem is not having enough information. Rich
How do you adjust the clutch on a 95 Saturn sl?
The clutch on a Saturn is not adjustable. If your having problems with the clutch, first thing you should do is check the fluid level. there is a small resiorvior located to the right of your brake master cylinder, on the firewall. If the unit is full, you may need to replace your clutch.
My Honda having problems with the clutch it won't shift properly and I have tightened the cable. What should I do next?
figure out how to change master clutch cylinder and slave cylinder,then bleed the system properly
Your 600 series ford tractor clutch does not engage?
check the back axle oil level first as if it is low the dual power can slip then check the free play on the clutch pedal you should have between 1cm an 2cm of free play in the pedal before you feel pressure on the pedal if there is no free play then adjust the linkage under the cab until you have the desired amount if this is not the problem your clutch is probably gone you will have to split the tractor and examine the clutch and pressure plate and repair as necessary if the clutch is good then you could have a dual power problem so the dual-power unit will have to be checked and repaired
