Thaw it out then insulate it so it doesn't freeze again.
2" from finished wall to end of 1" threaded pipe.
The pipe out of the wall usually only sticks out a couple of inches. You add what is needed to the sink drain.
Heavy Wall pipe refers to a steel pipe has a wall thickness of relatively thick. by SunnySteel.com
As long as the pipe going into the wall is straight, the rest of the drain pipe can be routed however it needs to be. Very often the trap is at an angle to the pipe in the wall.
There should be a nut around the chrome pipe holding it to the brass. Loosen the nut and pull the chrome pipe out.
its the thickness of the pipe wall
Double Wall Corrugated Pipe.
WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE WHAT NEEDS TO BE REPLACED WHEN ANTI FREEZE LEAKS FROM CAR WALL PIPE
Not quite. The invert elevation of a pipe is measured at the flow line which is the bottom inside of the pipe. The bottom of pipe elevation should be the bottom outside of the pipe. The difference betwen the two measurements is the thickness of the pipe wall.
Should be a thick wall 3/4 poly pipe .
the wall thickness of sch 40 - 500mm dia pipe is 15mm or 16mm.
Standard is 12 inches to the center of the pipe from the finished wall.