A large or small can from vegetables or beans, And put A balloon on the top
Well if i can make a pvc pipe drum shell and use (i dont know what to use yet) for a drum head, you should totally be able to make a drum out of wood and plastic, you might need a few metal parts from a drum though.
To make a bigger sound Yes
Beater pads will make the drum head last longer. So if you like the head you got, use a pad.
It should run quite free. Due to drum runout, scaling or wear there will possibly be little areas where the friction material will come in contact with the drum. This is common when new shoes have not had time to 'bed in'. This 'binding' may slow the drum slightly but it should not cause the drum to lock-up or make the drum difficult to turn by hand. If the binding is exessive in places the drum screws are not seated and snug tight or there is dirt between the the hub and drum mating faces. Basically the drum is not seated flush.
Place the Pygmy on the drum then tap the sky to make fireworks he will then drum
hit it
sometimes the drums do not make a sound, because they are on the floor, so the sound cannot leave the drum. make sure it is above the ground and then play it, it should make sounds then. there are some drums which don't need to be off the ground to make the sound, but make a better sound if are off.
A winch rope should always be pulled from the bottom of the drum.
It will make a noise. The pitch will depend on the type of drum.
The main drum bearing is gone-resulting in the drum drooping. If this is the case, the machine should likely make a heck of a racket when cycling.
Rampage!
you bang it