Moisture and mold resistant carpet padding.
6'' thick sand filling, then 9'' thick plain cement concrete 1:4:8 [ ratio] then top layer of Plain cement concrete 1:1.5:3 mixed with concrete mixer. proper vibrator should be used. expansion joint should be after 2.5mts to 3mts alternatively of 12 mm wide and filled with the mixer of hot bitumen sand mixed. by: m.s.chaudhary [civil engineer]
Concrete is what you make a sidewalk from. To make concrete, you mix Portland cement, sand, gravel (aggregate) and water. The cement holds the aggregate together.
penis
Gluing splices is the common way to lay pad for carpet.
They should not be cleaned in the kitchen sink and YES, it will harden in the drain.
If the carpet glue is dense enough to affect your tile cement then you should remove it by sanding. -If it's only sparse then it won't matter.
I would get advice from a professional. I suspect that the cement backed board (plaster board?) would crack and turn to powder under the flexing as people walk across the floor.
3 hours man
The field test of cement are 1.Insert the hand in cement bag,one should feel cool. 2.Rub the cement between fingers,one should feel silky 3.Through handfull of cement in a bucket of water it should float before it sinks.
Should be at least 2 weeks or before
before you cant afford to pay them
According to the Portland Cement Association, portland cement should not be capitalized.
Yes, always vacuum first! The carpet should be vacuumed thoroughly with a regular household vacuum cleaner, before starting to clean it with a steam carpet washer or cleaner. It will also fluff the carpet fibers, loosening deep down dirt from within.
You should allow your carpet to dry at least 24 hours before stepping on it. Some carpets take longer to dry.
Before renting a carpet shampooer you should know what kind of chemicals the one you are renting takes. You should also be sure to read the fine print of the contract to make sure you know what you are paying for and what to expect from the machine that you are renting.
Cement mortar should be allowed to set overnight before disturbing, several days if you plan on washing it with dilute muriatic acid.
The water should be added last. All the aggregate materials and the cement should be thoroughly mixed before the water is added.