If your talking about the Ford Fusion you don't have a number 7 plug because it only has six plugs.
what is the spark plug firing order on a 1900 dodge Dakota and the number one spark plug located on motor and rotor
#1 spark plug is always located at the cylinder closest to the belts.
passenger side third spark plug back Driver side ?
Number 8 spark plug location on a 4.6 liter ford 2002. Is located on the Driver Side , Last one near the fire wall...
Second from the left.
Number 3 is passanfer side 3rd one back, number 4 is first one on the drivers side
On the 4.2 inline 6, the 4th cylinder from the front of the engine is number 4. The engine is a coil on plug, the spark plug is located under the coil in the center of the valve cover.
There is no spark plug cap located on the 1993 Chevy Blazer. The spark plug gap for this vehicle varies depending on the type of spark plug that is used. The OEM spark plug gap for this year is 0.040.
number #1 spark plug is located (if u are looking under hood) right side first one closest to you. NOTE* TO REPLACE SPARK PLUGS ON A CHRYSLER 3.5 LITER V-6 YOU MUST ALSO REPLACE UPPER PLENTIUM GASKET!!!!
The spark plug is located under the fuel tank. You need to remove the tank to replace the plug.
To locate and change the the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plasitc engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insullated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4).
They are located at the end of the spark plug wires.