Want this question answered?
93.5 inches for the bypass
Stock belt size is 102'' with the smog pump pulley. You will need a 94.5'' belt to bypass it. Make sure when you remove the pulley, that you put the three screws back in to keep the holes from rusting.
what belt size to a 302 bypass for removal of smog pump and AC
you must remove belt and a/c comp. if you have it. $5 part 2 hour job.
It is not required, but is a good idea.
A smaller belt
it also has the stock pulleys and everything just want to bypass the ac and smog pump thanks
97 f250 5.8 i put a gooyear 6 groove 945
Unfortunately the Taurus needs the AC Pulley to turn the water pump you CAN get a bypass pully for 30 bux and use the same belt and routing but the shorter no AC belt will not work on that engine
The easiest way to remove a bypass hose on a Dodge is to cut it off with a sharp knife. The hose is cheap, I replace it with every water pump.
You may not bypass a smog pump. It is a part of the vehicle's emission's control system and bypassing it is a violation of federal law.
Go to Autozone and get an 88.2-inch 6-rib serpentine belt. This will effectively bypass the smog pump and keep all other accessories operational.