Usually 5/8" .
It truly depends on the size of the building, where it is located, how old it is, etc. If it is a work site building, the costs are going to be higher than a building used for a home.
grain size analysis is used to accertain the various sizes that are available in a particular sample of soil since it is required to calculate the strenght of concrete mix and also the king of soil that the sample is.
AnswerTwo word answer> GENERAL-CONTRACTORAnswerYou might be interested in reading this: http://www.pmhut.com/strategic-planning-and-construction-project-programming (can't copy and paste, sorry).
Depends on several factors. Location of building (what building code it falls under) wind patterns size of the window opening for large glass openings in a cold/hot climate, 6mm triple glazed is common. overall the unit is about 38mm thick with the glass and air interlayers
*
Depending on the size of the closet desired, there will be four basic materials required to create a custom closet. Those are drywall, wood, drywall brackets, and paint. Some people want mirrors, which means glass will also be needed.
For interior walls you want to use 1/2 inch size drywall. You want to use the thicker drywall because its stronger and it's a lot harder to damage than the thinner drywall.
Depends on your local by-laws or codes.
HYPNOTISM
That's the standard size available in almost every building products store.
They are poured in a continuous line in a drywall plant and cut to size after heating .
I am looking into building an office space that it 13x12x15. How much would it cost to have a room that size built?
data required on size
Length will vary from 1" to 1-3/4" for various thicknesses of drywall and application types.
The number of extinguishers will be based on the size of the building as well as the type, location and size of any specific hazards that may be present such as a commercial kitchen or storage for flammable liquids.
On Average the cost to install drywall in most major cities is roughly 3.00 per sqft. Of course this depends on the size of job. A simple way to cost out the price of a drywall job is to basically figure out how many sheets is required and base it per sheet complete at a cost of 100. that includes taping and finishing.
If it's small spread mesh tape over it, then mud it. If bigger than doorknob size, put a patch of drywall into it then mesh tape and mud.