The foot valve in a well should be the same size as the down pipe, usually 1 inch, but could be as small as 3/4 or as large as 1 1/2 . Foot valves are made in all those sizes.
A foot valve is something that you eat with your foot
Are you sure you don't mean 'foot valve' - this is the valve at the bottom of a well suction pipe when you use a jetpump. I've never heard of 'foot trap'.
That is like saying what size is an automobile. Which size valve?
In valve, port size is formaly called as a trim size which depend on pressure & Flow.
A foot valve, in relation to a water well, is a check valve at he bottom of a well to keep the water from running back into the well from the pump when the pump is not running. If the check valve does not hold the water the pump will lose it's prime and will not pump water.
The same size as the pipe it is hooked up to in the well.
A foot valve is something that you eat with your foot
Are you sure you don't mean 'foot valve' - this is the valve at the bottom of a well suction pipe when you use a jetpump. I've never heard of 'foot trap'.
It will only work properly if you put it very close to the foot valve. In which case you may as well replace the foot valve - it's not difficult to do. If you put it at or near the pump, the pump will just suck air.
That is like saying what size is an automobile. Which size valve?
his foot size is 8
Based on phisic , the size of Needle Valve is limited , maximum 1" and used for high pressure operation , Plug Valve the size no limited
Miranda's foot size is probably 7
a person foot size can be determine by discontinuous variation
1 foot size is 12 inches
DN 50 means: "DN": Diametre nominel - Nominal diameter of the valve, and "50" is the size of the valve in [mm]. Alternative is NPS (Nominal pipe size in inches).
depends how big your foot is ;)