Want this question answered?
A 2000 Ford Expedition vacuum hose diagram can be obtained from most Ford dealerships. The vacuum hose diagram can also be found at most auto-parts stores.
Usually you just buy hose and bypass the core.
Air intake hose between tb and air cleaner
The sensor is locate on the hose that connects to the air filter. Big Black hose (Wire is sticking out the hose) It cost $15 dollars at part store.
A blocked heater hose could cause a leak. A stopped up heater core could as well. Or the connector in the Windstar could be cracked.
There are two heater core hose that goes to the firewall the inlet and outlet. through that hose, you will also have the rear heater core hose attached to a T joint in both the inlet and outlet hose. You splice the hose of the front heater core inlet and connect that to the rear heater core inlet hose. Same goes to the Outlet hose with the T joint using a conncetor which you can buy at your auto parts store, 3/4 inch size. Basically you are bypassing the front heater core that is connected to the firewall. You wont have any defroster and heater for the front, but the rear vents and control will have heat.
Check out the Google Images and search for '93 Ford F150 heater hose'. you should find it there.
The heater hose on a 1997 Ford Escort has got both the length and radius. The length is 417 millimeters while the radius is 50 millimeters.
do u have a diragram
Cut off the crimp connectors, pull the old hose off and replace with conventional heater hose and conventional hose clamps
It should be the same as my 1995 - at the firewall the heater hose nearest the drivers side is the inlet hose to the heater core
Install block heater in lower rad hose .