36 mm.
Torque 103ft pounds.
I'd need to know if you had a solid front axle or a double wishbone independent front suspension in order to answer this.
36mm.
axel hub nut is 30 mm
Very carefully..
Rear you have to change the entire hub assembly Front you have to remove the axle shaft
You can find a 1989 Chevy front axle diagram at most Chevrolet dealerships. Most local libraries will have Chevrolet service manuals with the front axle diagram.
drawing for bearings and seals of front differential axle
the most common failures on a 02 s 10 are front bearings as well as hub assemblies
If you are talking specifically about the differential, then the answer is yes, but only if the two trucks have the same model of axle, and you also switch the axle shafts. If you are talking about the entire front or rear axle, then this is also possible. All straight front axle 4 wheel drive Chevy truck front axles can be interchanged (some will need conversion u-joints in the front driveshaft to connect). Also, 73-87 (and 88-91 blazer and suburban) rear axles can also be interchanged, with a caveat: 1 ton trucks have different rear axle spring pad spacing, and the 1 ton rear axles will not fit 1/2 and 3/4 ton trucks without cutting, moving them, and re-welding.
look under the truck and then look in the front theres the axle its that esay
Strait axle front beam with king pins.
Centre of the front axle to the centre of the rear axle.