Want this question answered?
\'02 Ventures use M8X1.25X98.5 exhaust manifold studs.
NO, you need to use a Vortec manifold, tons available from Summit Racing, and the forums at full size chevy have great info on the swap, detailed....
The exhaust manifold for an E250 is usually sold as a complete kit. The nut is a standard issue, and is between the a half inch and a full inch diameter.
The year, engine size and if it is the intake manifold or an exhaust manifold gaskets would help.
Depending on the location and size of the crack, you may be able to have it welded shut or you may have to replace the manifold.
They are supposed to be 3/8-16
10mm x 1.5
not sure........nissan part # 08918-2081A
on the engine block on the passenger side down below the exhaust manifold.
1-7/8
yes as long as it is the same size 3.1 or so on and you will have to change the one exhaust manifold i know that for sure because i just put a 96 3.1 liter into a 97 lumina.
the 95 and the 93 full size pick ups are identical there should be no need to swap parts the 95 vortec from an S-10 will need the entire intake manifold, exhaust, sensors, and wiring harness from the 93 to make it run