11/16inch or 18mm socket.
Could be anything, remember this: you need fuel, air, and spark to run a motor, first make sure you have that and then go from there.
They don't have spark plugs, therefore, no need for a wrench
i was told buy Ricky Stator for my 2000 Yamaha 350 warrior and i think its the same for yours is green to brown=300 ohms red to white=500 ohms its your stator, i had the same problem !!!!!!!!!!!!!!!!
If you want to tune a 1995 Yamaha Blaster you will need a socket wrench, spark plug socket, D8ES spark plug, Phillips screwdriver, solvent, motor oil, oil pan, 17 mm socket, a jack, degreaser, shop towels, and an off-road chain lubricant.
use the spark plug wrench and use used mirror to find the rear spark plug, you need to two person to do this, then fell the spark plug rear with your hands then apply the spark wrench to remove the old spark plug.
5/8 inch spark plug socket.
yes it will but you need to change the front brackets up
According to the Yamaha Parts Catalog online you need Yamaha Part # 94701-00333-00, SPARK PLUG NGK Standard DR8EA #7162 Gap .024 See Links. Hope This Helps.
The spark plug is located under the fuel tank. You need to remove the tank to replace the plug.
You will need a general screwdriver, a spark plug socket, a socket wrench and and extender, a wire brush and a silicone dielectric compound. You should find more of these tools at SEARS or your favorite car parts dealer. You will need a spark plug wrench with an extension to replace the spark plugs in a 1998 Nissan Sentra. You can find an instructional video at www.youtube.com.
Your starter could be weak and need a rebuild.
Use NGK MOdel # d7ea WITH A GAP SIZE OF 0.028