0
What size socket is needed to remove the oil plug on a 2003 Eclipse?
Wiki User
∙ 12y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you remove the spark plug plenum for a 2003 mitsubushi eclipse?
You can remove the spark plugs in your 2003 Mitsubishi Eclipse by turning the spark plugs to the left. You should use a 5/8 deep well socket. The spark plugs will come out.
What size Allen socket is needed to remove bolt from caliper on 2002 ford escape?
I have a 2003 Escape and it took a 7 mm socket.
Does it require a special tool to remove the brakes on a 2003 Ford Expedition?
There are not any special tools needed to remove the brakes on your 2003 Ford Expedition. You will need a lug wrench, a 9/16 socket, a screwdriver, and a needle nose pliers.
How do you replace the fog lights for a 2003 Chevy Tahoe?
Remove the socket from the rear of the fixture, remove faulty bulb from socket and replace with good bulb and replace socket in fixture. Fini!
Is there a special tool socket to remove the flywheel bolts for a 2003 2.5 Nissan?
Snap-on socket # SLEPL 200
How do you remove the left side fender cover Mitsubishi Eclipse 2003?
grundle
Where is the egr valve on a 2003 eclipse?
if your eclipse is a 6 cyl then it is on the back of the intake plenum and it is easy to get to as you have more than enough room to room it with just a socket and small rachet.
How do you change the alternator in a 2003 Mitsubishi Eclipse?
Remove the wiring harness from the back of your 2003 Mitsubishi Eclipse alternator. Loosen the alternator tensioner bolt. Remove the alternator belt. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
How do you install a oil pressure gauge on a 2003 eclipse?
T off of stock pressure switch (sending unit) It is below the intake manifold on the back. Unscrew the lead clip with a phillips, then remove the whole unit with a 1" socket.
What size socket do you need to remove the spindle nut on a 2003 Sonoma 4x4?
1 3/8 inch deep socket
What tools are needed to change the front and rear brake pads on a 2003 Mitsubishi Eclipse GT?
You will need a hoist, a socket wrench set and a torque wrench. You will also need the brake pads, brake fluid and brake grease.?æ
What size Allen socket is needed to remove caliper bolt on a 2005 Expedition?
Try a TORX T-40 or 45 Many second generation Expeditions (2003-2006) use a 9mm to remove the front caliper and a 7mm for the rear.
