Should be a 34mm socket. You can find or sometimes even rent these sockets at your local parts stores. Autozone will have it to buy or rent.
Mike
First pry off center cap with Mercury Logo. Second Remove the screws securing the wheel cover to the wheel cover adapter. The OEM tool provided is "T" shaped with a screw driver for prying and a small socket at the bottom of the "T" for removing the screws. A small socket wrench will work fine. Good Luck
Yes
i just want to know how to remove the flywheel on a 1007 Grand AM Pontiac
5 0n 4.5
by changing the steering wheel and fixing wats rong wif tha steering
yes
Center/ top of the Firewall.
After you remove the center console, you can reach around the back of the dash and disconnect the power cable to the socket, then hold the "nut" on the back of the socket and unscrew the socket.
NO it will not. The center shafts or different lengths. The center shafts in the 4-wheel drive transmissions are longer so the transfur case will fit onto it.
Use wheel adapters. You can get them at performance shop or wheel/rim shop.
you will find the fuel filter under the car next to the right rear wheel
85 to 105 Ft-lbs