First pry off center cap with Mercury Logo. Second Remove the screws securing the wheel cover to the wheel cover adapter. The OEM tool provided is "T" shaped with a screw driver for prying and a small socket at the bottom of the "T" for removing the screws. A small socket wrench will work fine. Good Luck
how to change a valve cover gasket on a 97 mercury grand marquis ?
remove engine cover
What Type and Year of Mercury? (I.E., 1997 Mercury Grand Marquis.)
According to the 2001 Mercury Grand Marquis owners manual the fuse panel is below and to the left of the steering wheel , by the brake pedal , and has a cover on it
ask a car dealer
On a 1999 Mercury Grand Marquis : In the fuse panel below and to the left of the steering wheel , by the brake pedal ( it has a cover on it ) ( # 16 is a 20 amp fuse for the cigar lighter )
On a 2000 Mercury Grand Marquis : The fuse box is below and to the left of the steering wheel , by the brake pedal ( it has a cover on it ) Also , the Power Distribution Box ( which is " live " ) is located in the engine compartment
should be drivers side, near valve cover.
On a 1996 Mercury Grand Marquis : The fuse panel is under the dash , to the left of the steering wheel column ( it has a cover on it ) Also , the Power Distribution Box ( which is " live " ) is located in the engine compartment by the battery
In a 2000 Mercury Grand Marquis fuse ( # 16 ) is a 20 amp fuse for the cigarette lighter ( in the fuse panel below and to the left of the steering wheel by the brake pedal , the panel has a cover on it )
You should be able to go under the hood and remove a cover. This should reveal the back of the light enclosure. Just remove the bulb and replace it with a brand new one.
Its behind the cover of the intake you can replace it without removing the cover if you have the right tool should be about a 5/16