HAMMER THE CLOSEST SIZE SOCKET YOU HAVE ONTO THE WHEEL LOCK THEN USE A RATCHET TO REMOVE IT
you do not use a socket you use a wheel bearing puller to remove it from the hub Putting a right size socket into it and hitting it with a hammer can pop the bearing out, but it can also damage it so its advised to get the right tools. size 30 mm for the wheel nut and the bearing puller
36mm 12 pt, you require a thin walled socket to remove and replace them.
32mm
The correct size socket and ratchet to remove the hold down. And the correct size socket to remove the battery cable clamp.
What size Allen socket is needed to remove bolt from caliper on 2004 ford escape
to dissasemble wheel bearings you need a special socket after you remove 4x4 hub this special socket will only fit the front bearing nut .a different size is used on the rear
54mm
it is a 22m socket
it is a 29 mm hub nut socket
The Socket Size for a 2001 Sephia Is a 32 mm
Champion 5843 can be removed with a deep reach socket, size 3/4" or 19mm