Want this question answered?
Get a spark plug socket and wrench that fits the plug body and remove it by turning counter-clockwise.
use the spark plug wrench and use used mirror to find the rear spark plug, you need to two person to do this, then fell the spark plug rear with your hands then apply the spark wrench to remove the old spark plug.
Most snow blowers have the spark plug on top of the motor :to change a spark plug you get a spark plug wrench (take wire cap off the plug) put wrench on spark plug then turn counter clock wise to take it out. To put a new one back in reverse the proses
Spark plugs use SAE and not Metric. The one that fits it is the one that fits it.
A special 18 mm spark plug wrench. Use the Honda spark plug Wrench which comes with the standard tool kit below the seat. Use this and you will get all the plugs out easily.This 18 mm wrench is thinner and longer than a regular spark plug wrench. If the original wrench is no longer in your bike, you have to buy a new one.
Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.
With a Spark plug Wrench
Buy a plug wrench.
They don't have spark plugs, therefore, no need for a wrench
most likely it will be a 5/8" spark plug socket.
The one that fits it tightly/
Yes