Want this question answered?
53 cc lt1 heads...92-93 good heads for porting
The combustion chamber size of the heads with the casting number 376450 is 60cc. It is possible to install larger valves.
There 194 heads 1970 to 1980 heavy cast iron heads
they could have either 1.94 intake 1.50 exhaust or 2.02 intake 1.60 exhaust
they came with "186" casting number heads.........
You need to get a Casting # book and look up which heads you have.
The chambers are 60cc. The heads are from 77-78 307 engine.
Find the casting number on them... type "GM (insert casting number)" into a search engine and you should find what you're looking for.
yes there are 8 intake valves and 8 exhaust valves in the set of heads
Heads: Casting Number 3904390 - 1966-68 427, Intake 2.06, Exhaust 1.72, Closed Chamber, 98.4 CC.
Yes, but the valves would be 1.88/1.60 and they would have less flow. You could use 318/340/360 heads on any LA small block. The only problems would be compression due to bigger combustion chambers in 340/360 heads than in 318 heads. Do a valves job and resurface the 340 heads. In 1971, the 340 came with the J heads and 2.02/1.60 valves. Since 1971 saw the introduction of the "360 style" J head, they used the same casting for 1971 340s and 360s, with different machining for the different sized valves. The 360 head actually saw first limited use in the 1970 340 Six-Pack AAR/TA, which also had 2.20/1.60 machined heads. Also the "J" heads can be machined for the big valves.
This number will tell you what year and what moter the heads will fit.There are books put out for this purpose.