18mm
You will need a pulley puller to remove a power steering pump on a 1996 Ford Windstar.
Refer to the instructions in the "Related Question" below regarding alternator replacement.
96 windstar 3.8 oil pressure switch is located under power steering pump. Remove serpentine belt and alternator. Remove PS pump pulley with special puller to get access to PS pump bolts. Drain PS pump and remove PS hoses. Remove PS pump.
How do you remove high pressure power steering hose 2000 odlsmobile intrigue
A person needs a steering wheel puller to remove a steering wheel. It will help remove the steering wheel by putting pressure on the middle and by pulling up on the rest of the steering wheel.
Remove the wiring harness from the 2003 Jeep Liberty pressure switch. Remove the power steering pressure switch retaining screws. Reverse the process to install the new power steering pressure switch.
Local car part stores have a tool called the steering wheel puller, that has to be used to remove the steering wheel. This is used to remove the steering wheel by applying pressure to the middle and pulling up on the rest of the steering wheel to remove it.
Steering wheels are hard to remove. A tool called a steering wheel puller needs to be used to remove the steering wheel. It removes the steering wheel by applying pressure to the middle and pulling the rest of the wheel up.
It is hard to remove a steering wheel by hand. A person has to use a steering wheel puller to remove the steering wheel. It applies pressure to the middle with a screw/bolt and it pulls the rest forward.Ê
Removing the steering wheel by hand is hard. A person needs a steering wheel pulled to remove the steering wheel of this car. It applies pressure to the middle of the steering wheel and pulls up on the rest of it.?æ
Actually it does help to remove it. Just did this on my 96 Windstar. Visit Autozone, and pick up the socket for the oil pressure switch(runs $5.99 here in NV). It will make removing and installing so much easier. Also, while at Autozone, ask about the removal kit for the pulley on the power steering pump. If you don't want the hassle of doing it yourself, the $93 that was charged is not bad. I chose not to, as they wanted $1200 for repairs that I have done for $400. Good luck with whatever you choose!
To remove a pressure switch in the power steering Au Falcon the proper tools must be obtained to take the piece apart. The proper instructions must also be obtained.