It will be a 14 or 17 mm wrench.
You need a 15 mm regular wrench.
Metric Allen wrench.
If I'm not mistaken, 14mm for the caliper bolts, 17mm for the caliper brackets.
You need a 3/8 Allen Wrench
the caliper bracket bolts use 18 mm wrench on a 03 1/2 ton 4x4
it takes a 7mm Allen wrench to remove calipers on 2003 ford focus.
It should be a 3/8" Allen wrench.
Lug Wrench to remove tire & Wheel Socket Wrench or Hex Wrench to remove Caliper bolts Large "C" clamp to collapse caliper piston Rags, and a good spray brake cleaner
That would be a 7mm Allen.
The T60 is the size needed to remove caliper bracket.
7mm hex socket
You need a 3/8 Allen key.
I believe that is a 3/8 Allen key.
Proper Torx bit or wrench for caliper C-Clamp to retract piston to get it off the disc
the caliper bolts require a 3/8" Allen wrench. You can buy these as a socket at just about any parts store.
Most likely a 3/8 Allen, but 15 mm wrench is possible.
Loosen and remove the caliper retaining bolts. Torx T-40 or T-45
I believe it's either a 40 or 45.
your going to need a t-40 torx socket.
Most likely for this type of van is a 3/8 Allen wrench.