Want this question answered?
A few of the reasons: 1. So that the coolant does not leak out of the system. 2. So that the coolant can be made to circulate through the pipes (pressure is required). 3. So that Pressure can build up in the cooling system. This allows the coolant to reach a higher temperature before boiling. Once at its boiling point, the temperature will not rise, and additional cooling is inhibited.
what is the temperature from an arc flash can reach
The dark regions reach a temperature of 130 K (-137°C) during the day. The brighter regions reach 110 K (-157°C).
80 degrees Fahrenheit
what is the temperature from an arc flash can reach
Below 40 degrees f.
There is no straight forward answer for this, Newton described this in his Law of Cooling. The rate of cooling (change in temperature) is proportional to the difference in temperature. Here is an example, let's say you shade a area on the ground, when you remove the shade and expose it to the sun, the rate of cooling will be rapid at first because the difference between the shaded area and the sun's radiative temperature are greatest. Then the temperature will begin to level off as the two temperatures begin to reach an equilibrium.
The cooling system is pressurized and requires a higher temperature to reach boiling.
A cooling/freezing system using one compressor and 2 or more different gasses and heat exchangers to reach a lower temperature, the first refrigerant cools the next and so on.
The engine temperature must reach 232-235 degrees in order for the cooling fans to come on. They will shut off at about 195-200 degrees. Also when the air conditioner is on the cooling fans automatically come on regardless of temperature.
Always try simple first...thermostat is probably stuck open...cheap and easy replacement.
serving hot food has to reach core temperature of at least 57 C in order to kill most of the pathogenic organisms while serving cold food temperature be lowered to less than 5C as these two temperature values have been proven to be the critical points for reference for serving safe foods.
Under normal conditions the thermostat opens at 195 degrees. The water temperature will reach between230 to 235 degrees and the cooling fan will come on and cool down to around 200 degrees and then shut off.
A few of the reasons: 1. So that the coolant does not leak out of the system. 2. So that the coolant can be made to circulate through the pipes (pressure is required). 3. So that Pressure can build up in the cooling system. This allows the coolant to reach a higher temperature before boiling. Once at its boiling point, the temperature will not rise, and additional cooling is inhibited.
Surrounding temperature, or body temperature? The latter is not compatible with life. The former only if enough cooling by evaporation of sweat is possible.
A boardinghouse reach is the ability to reach a long distance across a table in order to get desired foods, or the action of a person who is reaching to get desired foods, often considered to be poor etiquette.
Hot water has much heat to transfer to the ice, cooling itself down and melting the ice. Temperature difference is the driving force of this, heat always going from high to lower temperature. When both (remaining) water and (remaining) ice reach the same temperature heat exchange will stop.