Satin is lower gloss than semi-gloss paint.
Paint finishes in order of decreasing gloss are:
* Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint.
The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
It is not the color that is flat, it is the surface that is either glossy (very shiny, like a new car), or semi-gloss (not as shiny, but still a little shiny), or flat (not shiny at all, though still smooth). These terms are usually used to describe what a wall or other surface will look like when paint has been applied and dries.
apparently its 18 and over..<3
U have 2 draw 2 lines if you were doing zero draw a semi circle in the middle draw a diagonal line on the left to connect the 2 ends of the lines, in the semi circle draw 2 circles 1 biggish the other1 a bit smaller then on the bottom in the semi circle draw a smiley mouth thing then connect it to the edges! :) and 4 normal 1's do a circle a little bit of wavy thing's like at the bottom then add two smallish circles on top of that then make sure ones is bigger than the other:)1234
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
No, you can dull satin or semi-gloss but not the reverse.
If you have the required satin or semi-gloss base product and pigment, you can.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
semi gloss
Semi gloss would stand up to weather better.
Your question was:"Should I use satin or semi gloss on a ceiling?"ANSWER:Satin for sure, semi gloss doesn't look good on ceilings, in my opinion.Try asking some of your friends, they could help you.I hope this helped, and if it didn't, sorry.
No. They have different textures and looks.
Arson.
They include flat (matte), satin, semi- and hi gloss. It depends on if it is oil or water based. Varnish & stains offer different sheen options, also.
you can mix paint of different sheen levels provided they are of the same vehicle or base (i.e.. water based, oil based. Mixing a satin with a semi-gloss will still be reasonably close to an "eggshell" finish. The best way to know is to use the chart below and add the 2 sheen level percentages together and divide by 2.For example a low sheen (satin) is 20% sheen + Semi-Gloss which is lets say 50%20+50=70 divided by 2 = average sheen of 35% giving you an eggshell finish.Flat (1-9% gloss)Low Sheen (10-25% gloss)Eggshell (26-40% gloss)Semi Gloss (41-69% gloss)Gloss (70-89% gloss)