Want this question answered?
gearbox
There are no particular boats equipped with the V Drive, but a boat that is equipped with it usually has two drive shafts. The boat will also have a gearbox and propeller.
It is an intermediate shaft between the powered and driven shafts in a belt drive
Only with drive shafts removed.Only with drive shafts removed.
Drive shafts, PTO shafts, Steering shafts, Axle shafts,
you need to remove the drive shafts and the gearbox // but you can replace without taking the gearbox fully out the car you use screw rod of the same thread dimension on the tp two bolts of the box and slide it back far enough to carry out the job
Could be a PTO (Power Take Off) to operate accessories like a dump body or a snow plow.
Drive shafts & axle shafts
There are a number of reasons that drive shafts break. One reason drive shafts break is because of improper or no lubrication. Another way could be that the U-joint breaks or gets worn out.
The front axles are your "driveshafts" on ALL front wheel drive vehicles. Other wise there are no drive shafts.
Yes
The purpose of a clutch on a vehicle is to disconnect the drive of the engine from the gearbox (this would be required when the vehicle is stationary or to change gear). While the engine is running the crankshaft is continually turning, It is the crankshaft that turns the gearbox and via the gearbox the road wheels. Obviously there are times when the engine is running but drive is not required, The clutch is the mechanism by which this is achieved.