answersLogoWhite

0


Best Answer

check the switch at the break peddle

User Avatar

Wiki User

โˆ™ 2010-06-05 17:48:15
This answer is:
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar
Study guides
๐Ÿ““
See all Study Guides
โœ๏ธ
Create a Study Guide

Add your answer:

Earn +20 pts
Q: What to do if my 1999 Mercury Cougar has no brake lights and the bulbs and fuses are fine?
Write your answer...
Submit
Related questions

The tail lights on my 1993 Mercury Cougar dont work. All other lights and signals work including the rear turn singals and the hazards.?

If you have not done so, check the tail light bulbs. The Cougar uses a multi-function bulb, with separate elements for brake lights and directionals. It is possible for one element to burn out, while the other is still intact. To get at the bulbs, pull up the trunk liner in the corners. The bulbs are easilly accessable, and come out with a quarter turn.


What do you do if your tail lights do not work while driving though brake lights work fuses and bulbs are good?

on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights


1999 Mercury Tracer Brake Lights?

Check bulbs Check Fuse Check stop light switch


Your brake lights work when you brake not when you turn lights on?

AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.


Why do your tail lights not work but your brake lights do?

its on different bulbs


Your brake lights on your 2002 Acura RSX arent working but your tail lights are?

The brake lights and tail lights are separate wiring systems. Even some of the bulbs may have two separate bulbs in the same glass housing. If the bulbs are in fact working, then the next step would be to test the brake switch under the dash. When you depress the brake pedal the switch is pushed creating a connection to turn on the brake lights.


How do you change the brake lights on a 1997 VW Polo?

To change the brake lights on a 1997 Volkswagen Polo first locate the brake light housings in the trunk. Remove the plastic covers and unlock the bulbs. Remove the bulbs and install the new brake lights.


What could cause a 97 Mercury Villager's parking lights and dash lights come on when brakes are applied and the brake lights not to operate?

check the contacts on the brake light bulbs correspond with the terminals in the holder, eg not a single contact bulb in a double contact holder


What would cause brake lights and running lights not to work you have power to the brake switch?

fuse, bulbs


How do you adjust brake lights Volvo 950?

you do not adjust the brake lights check the bulbs or check switch top of brake pedal.


How do you rewire brake lights for a 91 Honda CRX It is not a fuse it is not the brake switch and not the bulbs.?

Type your answer here... Why are you wanting to rewire the brake lights?


Your brake lights will not work on a 1994 ford escort you have already replaced bulbs and fuses?

Working brake lights are important for safety reasons while driving. It is important to check all of the wiring, if the brake lights are not working and the fuses and bulbs have been checked.


Why do my brake lights and cruise control not work on 2001 ford explorer sport even though all other lights work?

The brake lights are a separate circuit from the other lights. Check the fuses and bulbs. If fuses and bulbs are okay I would suspect the brake light switch is at fault.


Why does your tail lights work but not your brake lights?

Make sure both bulbs are good (dual filament bulbs) check the brake light switch on the brake pedal. Also, if you are wired for a trailer hitch, the 4-5 wire module may be bad. Eliminate it and check the brake lights again.


Brake lights don't work when the brake is pushed. Work with headlights on only.?

The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.


No brake lights on s-10 blazer?

It is important to have working brake lights on a vehicle. If the brake lights are not working a person should first check the fuse, bulbs and at last the wiring.


Why do your brake lights not come on when you press the brake pedal?

you probally need to replace the bulbs


What to do if your rear brake lights are not work?

Check bulbs, fuses and brake switch in that order.


1990 ford ranger brake lights wont work we checked fuses bulbs and changed brake switch any other ideas?

check that you have double filament bulbs in tail lights


Is there Mercury in light bulbs?

Nope. Incandescent light bulbs contain no mercury. However, fluorescent lights, whether full sized or compact, do contain mercury.


Why would brake lights on 1997 Chevy Camero not work when lights are on?

The bulbs are burnt out.


Dash lights comes on when brake is pressed and third brake light comes on with park lights?

wrong bulbs or bad earth


What could cause my 1989 Mercury Topaz's brake lights to not work when all the bulbs are good?

A defective brake light switch could cause the problem. Also a defective turn signal switch could also. The brake lights work through the turn signals. It cancels the brake light so that the turn signal can work.


Why brake light in rear window come on but brake lights dont on 89 Nissan Sentra bulbs are fine and brake light switch has been changed?

check your bulbs


Why does your 2003 Ford Explorer's brake lights not work but the bulbs and fuses are fine?

If the bulbs and fuses are fine, it must be your brake light switch attached to the arm on your brake pedal.