the breakout set or dummy roughneck side
Hydraulics. They are used for oilfield drilling operations and widely applied in making up and breaking out of drill pipes. They are designed to be open-throat with high mobility to escape from the drill pipes freely. A drill pipe power tong consists of a spinning tong and a torque tong, it substitutes a cathead, suspension tong and spinning rope in making up and breaking out.
Mandrel for drifting the casing or drill pipe is forged with high-strength alloy steel, strict heat treatment process.
Scalpels Clamps Drill Brain tongs Skull lifters These should cover the basics
It depends on the diameter of the flange, the type of pipe, the materials, the type, size and grade of bolts, type, grade and size of the flange, and the pressure and temperature of the fluid transported in the pipe. Some pipe flanges require very little torque on their bolts while others need as much as 500 foot-pounds of torque, or more. The design and application will determine the required torque.
Hydraulic drill pipe tongs. They are available in tubular sizes 2-3/8" to 12 in".
Hydraulic drill pipe tongs. They are available in tubular sizes 2-3/8" to 12 in".
A 4 inch drill pipe torque is used for fishing in small casing.
the breakout set or dummy roughneck side
Hydraulics. They are used for oilfield drilling operations and widely applied in making up and breaking out of drill pipes. They are designed to be open-throat with high mobility to escape from the drill pipes freely. A drill pipe power tong consists of a spinning tong and a torque tong, it substitutes a cathead, suspension tong and spinning rope in making up and breaking out.
what grade
When calculating the torque you would use the lenght of which ever tong that is connected to your load cell.
56,300 ft-lbs. Go look at the NOV Grant Prideco website...
Oil is extracted through drilling a well into an underground reservoir, typically using a drill bit attached to a drilling rig. The oil is then pumped or flows to the surface through the well. Various techniques such as primary, secondary, and tertiary recovery methods are used to extract the maximum amount of oil from a reservoir.
Why is the right torque so important?
the torque is that is where all your power is it doesnt matter how fast the drill spins if it has no torque. That's why impact drills are so good cause they have alot of torque but don't spin as fast. But your should get a drill with alot of torque and a high number of amps per hour
Mandrel for drifting the casing or drill pipe is forged with high-strength alloy steel, strict heat treatment process.