A battery tester is basically a voltmeter used while a resistor is draining the battery -
For a car battery try an auto store
for household batteries try Radio-Shack or make your own.
A voltmeter, either stand-alone, or part of a multimeter.
Voltmeter or multimeter.
You can unhook the battery or use a scan tool.You can unhook the battery or use a scan tool.
Fix the cause, use a scan tool, or unhook the battery.Fix the cause, use a scan tool, or unhook the battery.
truck battery Check the specifications on the winch to find its voltage and amperage.
You can unhook the battery or use a scan tool.
You need to do a parasitic draw test. Use a voltmeter to check base voltage of battery. Then crank the engine, check voltage at battery. It needs to be at least two more volts than previous base voltage. Then apply a load or turn on headlights. The voltage should not drop over one volt. Ideal base voltage at battery terminals is 12.6, ideal charging voltage would be 14.6, ideal loaded voltage would be 13.6 volts aproximately. If you find a drainage in system and you have a good battery, then you need to check radio and main accessories first, then check door latch switches and courtesy dome lamps. You need to do a parasitic draw test. Use a voltmeter to check base voltage of battery. Then crank the engine, check voltage at battery. It needs to be at least two more volts than previous base voltage. Then apply a load or turn on headlights. The voltage should not drop over one volt. Ideal base voltage at battery terminals is 12.6, ideal charging voltage would be 14.6, ideal loaded voltage would be 13.6 volts aproximately. If you find a drainage in system and you have a good battery, then you need to check radio and main accessories first, then check door latch switches and courtesy dome lamps.
A battery float charger is intended only to keep a fully charged battery from losing its charge. It will NOT work to charge a battery that is discharged or damaged. Check the voltage of the battery to be charged. Do not use charger if the battery voltage is less than 9.6 volts.
You can use a scan tool or unhook the battery.
You can use a scan tool, or unhook the battery.You can use a scan tool, or unhook the battery.
You can use a scan tool or unhook the battery.You can use a scan tool or unhook the battery.
You can use a scan tool, or unhook the battery for ten minutes.You can use a scan tool, or unhook the battery for ten minutes.
You can use a scan tool, or uncool the battery for five minutes.You can use a scan tool, or uncool the battery for five minutes.