You should be able to remove it with your hand unless it was overtightened. In that case you will need to purchase an oil filter wrench. They come in many shapes and sizes. Your local auto parts store can assist you in choosing the correct filter wrench.
take the filter off then unscrew the bolt at the oil filter housing
how do i fine the oil filler in a 2009 corolla and get a tool to take it off
Just a socket wrench that will fit on the lid for the filter because it is a an actual filter cannister not the usual steel filter
Requires a special wrench tool. Look on eBay for "Volvo Oil Filter Wrench" They are about $10.
what can i do to take it off if it keeps on turning
It is on the bottom of the oil pan and you simmply take a wrench and unscrew it counterclockwise. On the newer tech 4s the oil plug was combined with the oil filter. It is a bigger plug then it usually is and might even take a special tool. == == No special tool needed, a socket works fine.
It's on the very front, to the right of the oil filter. You may have to take the oil filter off to take out the starter.
The oil FILLER cap is turned about a quarter ( 1/4 ) turn to the left and lifted out.The oil filter is removed by using a special tool to unscrew it from the engine block.
raise front off car, filter is left of starter on 3.1,get a oil filter wrench to take off.
Turn it counterclockwise.
Use a quality oil filter wrench and turn the filter counterclockwise.
Take the filter off and look where it mounts onto the motor to make sure there is not an old gasket stuck to it and if there is take it off and then put on a new oil filter hand tight, be sure to put oil around the gasket on the new filter before you install it.