A wrench tightens bolts. The mechanic across the street from me.
The cylinder head bolt torque for a 1999 Chevy Venture is 44 ft lbs. If you have a GM special service tool # J36660A, use that to turn the bolts an additional 95 degrees.
size 9mm splin
valve spring compresser
do you refer to a hexagonal bolt or a hex head bolt one has 6 sides one has 6 points inside the head hex bolt was originally made to replace a 4 sided bolt to make it easier to use hex head were originally made as a secure bolt that could not be removed without e special tool that was not available to the general public do you refer to a hexagonal bolt or a hex head bolt one has 6 sides one has 6 points inside the head hex bolt was originally made to replace a 4 sided bolt to make it easier to use hex head were originally made as a secure bolt that could not be removed without e special tool that was not available to the general public
Graduated cylinder is a tool to measure volumes.
The Allen head is NOT a bolt. Go to an Auto parts store and get a Power Steering Pulley Remover tool. The pulley is pressed on, there will be instructions with the tool or ask the counter person.
Ford has a SPECIAL TOOL KIT with brackets that mount to the cylinder head. NO OTHER WAY
There is a tool called a bolt remover that can be used to get the bole out. A hole is drilled in the middle of the bolt then the tool is inserted and turned to back the bolt out.
It is used to replace valve seals on many automotive engines without removing the cylinder head from the block.
It's a graduated cylinder.
You need a tool called a cylinder leakage tester. You remove the spark plugs and rocker arms, install the tool, and pressurize the cylinders to check for damaged valves.The other options are to install a new timing belt and try to start the engine, or remove the head and visually inspect.You need a tool called a cylinder leakage tester. You remove the spark plugs and rocker arms, install the tool, and pressurize the cylinders to check for damaged valves.The other options are to install a new timing belt and try to start the engine, or remove the head and visually inspect.