A sharp knife. to pop it. jk.idk
two wrenches flat screwdriver and pliers
Yes, no special tools needed. A brake shoe spring retractor tool will make it easier.
brake fluid.10 mm 11 mm , wd40, and a buddy to help ya
Your brakes need bleeding. And if you have antilock brakes, you should take it to a shop to bleed them. It takes special tools to bleed antilock brakes. If you have regular brakes you can bleed them yourself. Could go into further detail but would take too long to explain. Refer to a repair manual. Note: bleeding antilock brakes without first disconnecting the sensor will damage the sensor and the antilock function will no longer work (learned the hard way, unfortunately).
The brakes on the Villager are as straight forward as the brakes on a 1965 Mercury. Only normal brake tools are required.
Tools needed to replace front brakes 2002 Ford Focus?
what tools do i use to change the front brakes in my 2003 Pontiac grand prix
To replace brakes effectively, you need to know what type of brakes you have. In general, you will need a jack, new brakes, a wrench and Allen wrenches.
If you are doing the front pads, the bolts to get the calipers loose are either 15MM or a Torx 60. A C clamp to push the piston back in (use old pad to push pistion back in with c clamp.) You need a trustworthy friend to help you bleed the brakes afterward.
Basic hand tools should be enough.
Yes it is possible to replace brakes yourself. If you have the tools and a little background in cars, you should not have a problem replacing the brakes on the car.
No special tools needed.