In order to change out the front brake pads on a Chevy Celebrity you would need:
A suitable jack to raise the vehicle.
A jack stand to support the vehicle.
A suitable lug wrench to remove the hubcap and take off the wheel.
A 45T Torx wrench, to take out the bolts that retain the caliper.
A 10 mm wrench to remove the flex line clamp.
A "C" clamp to compress the piston into the caliper.
By the hissing noise it sounds like you need a new brake booster
a torx bit size t-55 for front brakes
All years of the Chevy Celebrity model are front wheel drive.
To change the front blinker bulb on your 1989 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
get a chiltons repair manual for chevelles and read up.
Its right up front. Piece of cake to change!
The fuel filter on a 1988 Chevy celebrity 2.5 litre FI is located right in front of the rear passenger side tire.
They are disc brakes and self adjusting
Yes, the front has discs brakes on them.
Steps on bleeding the brakes on a 1987 Chevy Celebrity. I am assuming that you know how to bleed brakes and merely want the order in which to bleed individual callipers or cylinders. If there is cause to believe that there is air in the master cylinder then it should be bled first. Then the individual wheels should be bled as follows: Right rear then left front. Left rear then right front. This per the factory service manual.
To change the front blinker bulb on your 1986 Chevy Celebrity simply reach up behind the bumper and unplug the socket from the fixture. Replace the bulb in the socket and plug the socket back into the fixture.
All Chevrolet Celebrity cars are FWD (front wheel drive).