very easy,just remove the little coveer inside the care that is by the side glass,then you see three or two bolts ,remove and unplug if power and reverse the step.
wrench
Your Mechanic should do this complicated Job. But if you want to DIY it then start [http://www.themotorbookstore.com/malibu.html Here] Hope This Helps.
if you need to know what tools you need you should not be doing this yourself tools you need should be self explanitory when you need to take off a screw, you need to look at the screw driver to match it when you take off a bolt, you match the wrench size with the bolt... take it one step at a time and go to crappy tire *cough* Canadian tire and pick a haynes manual for $20 shows you detailed pictures as well as detailed instructions.. as well as tools needed
On your door there is a rectangular plastic piece, some cars it has a round little speaker in it. Remove that piece by pulling it gently, so you wont break it. There will be 3 to 4 screws with bolts attached. Remove bolts and if they are power mirrors, you will need to unplug the connector. The connector is behind the door paneling. Its not that far down.
How to change blower motor on 2000 grand am gt
== ==
in refference to the exterior tow mirrors. i would like to swap side to relocate the spot mirrors, so I need to remove the "mirror face".
No special tools needed.
what size allen wrench do i need to change front brakes on a 2004 dodge grand caravan
you need lots of tools to do that then take it out carefully
tools you need for job
For a list of tools and step by step insructions check out the following website. http://www.oqcgp.com/forum/kb.php?mode=article&k=14 Hope this helps. "G" The quick answer is no. I recently changed my brakes on my 2000 GTP and it does not require any special tools.