I use a 13mm swivel socket and a very long extension, 3/8" drive.
15mm six point socket or 15mm wrench
A socket on an extension bar.
the caliper bolts require a 3/8" Allen wrench. You can buy these as a socket at just about any parts store.
No, you cannot use a metrc socket on a standard socket wrench. These are two different systems of measurement and are not interchangeable.
You need a torx type socket. If you use an Allen wrench...you will strip out the inside of the bolt.
The socket wrench is one among the system of wrenches that departs the wrench handle from the wrench that engages the fastener. Whereas, the torque wrench are the torque indicating socket wrench handle. When it is used properly, that could help you calculate the torque amount while fastening using the wrench. It also limits the amount of torque which is applied on material.
A socket wrench can drive sockets that totally encompass a nut or bolt head, thus getting a much better grip of it than a wrench.
Strong impact wrench and 22MM socket
A screwdriver and a 10mm socket wrench.
3/8 Allen wrench socket
3/4 inch or 19mm socket.
Struts on a car are a shock absorber that prevents the car from bouncing. A socket wrench is required to change the struts.