Electricians use a clamp or clamp-on ammeter to measure current. The handles are squeezed together and the "jaws" open up. The clamp is then slipped over the conductor and the handles are released. The "jaws" close around the conductor and the meter is then in a position to measure current in that conductor. When current flows in a conductor, the current generates a magnetic field around the conductor. And the clamp-on ammeter can "feel" the current and measure it, thus permitting an investigator to know how much current is flowing in that conductor. The clamp-on ammeter is a stand-alone meter, but can sometimes be the kind that is plugged into a digital multimeter (DMM). A link to the Wikipedia article on the clamp ammeter is provided.
You can find a good deal on commercial electric radiant heaters online at www.northerntools.com . They offer great brands like Mr. Heater for garages and commercial businesses.
All three wires, the "hot", neutral and the ground must all maintain the integrity of the circuit. This is why pigtails are connected from the main circuitry to the receptacle or switch devices so that they can be removed without opening the electrical circuit.
Yes a circuit will work without a switch but the only problem will be is that electricity will be wasted and there will be no device to stop the flow of current
Assuming you are talking about electrical circuits: "Cell" is the name given for a battery. Without a cell in the circuit, there is no supply of electricity. Therefore there is no electric circuit.
A complete electric circuit is basically an electric circuit in which the electrons flow from negative terminal to positive terminal without any disturbance. The switch has to be closed in order for this to work otherwise, the flow will be broken.
We can use a pH paper.
Yes but the meter has to go in series with the load. There is a new clamp on amp meter being introduced, that will measure larger DC amperages without opening the circuit.
measuring current usually requires opening the circuit to allow a meter to be inserted in series with the circuit, although clip-on current probes are available (but are rather expensive and typically bulky) that can simply be clipped around a wire without needing to modify anything.
A: NO voltage is a potential that theoretically can exits without any current flow
Add an ammeter in parralel with the circuit. An ammeter in parallel with a circuit to be measured will not measure any current. In fact, placing an ammeter in parallel will cause a short. The ammeter must be placed in series with the circuit to be measured. It should be noted that this technique only allows for small magnitudes of current to be measured. One should not try to measure more than 10 amps using this method. However, this is not the goal of the question asked. I am not 100% sure what "intercepting the supply" means but I think the person asking the question means without breaking the circuit? In this case one could use a clamp on ammeter. There are several varieties that can measure low currents and there are those that can measure 100s of amps.
The bulb is the load of the circuit, without it you have a short circuit.
No. You can't buy a HOP on Howrse without opening it. It is impossible.
Yes, in the United States of America, a parent may not force their child to get a cosmetic accessory without reason or without the child's consent. This is written in. Code 509.91 Subsection 21.2 of U.S. Law.
To broaden/opening minds without breaking/opening heads.
A circuit without any nonconducting wires
I think you mean the Supercharger belt? You cannot drive anywhere without your accessory belt... You can drive as long as you want without your Supercharger belt but be prepared for a substantial loss in power.
All three wires, the "hot", neutral and the ground must all maintain the integrity of the circuit. This is why pigtails are connected from the main circuitry to the receptacle or switch devices so that they can be removed without opening the electrical circuit.
The absolute minimum for a circuit is continuity. Without this it is not yet a circuit.