According to the 2000 Ford Crown Victoria Owner Guide :
It came from the factory with a 50 / 50 mix of distilled water and GREEN color
engine antifreeze meeting Ford specification ( ESE-M97B44-A )
Not really much you can do. Take it to a transmission shop for an evaluation.
According to the 2000 Ford Crown Victoria Owner Guide : With engine oil filter change : ( 4.7 litres / 5.0 U.S. quarts of 5W-30 engine oil )
MerconV
R134a
take off rear brake calpers and theres a set of brake shoes inside adj and reinstall
5-30
Removing a radiator from a Ford Crown Victoria requires draining the coolant, removing the larger coolant-to-transmission lines and separating it from the air conditioning condenser. The last step requires removing its stand-alone brackets, after which the radiator will easily slide out.
In a 2000 Ford Crown Victoria : In the power steering fluid reservoir ( located at the front of the engine , on the drivers side , between the engine air filter housing and the top radiator hose ) Take the vehicle for a drive so that the engine coolant temperature gauge shows it is approximately in the middle of the normal range ( C and H ) and you have made several turns Shut the vehicle OFF and check the power steering fluid level ( it should be between the minimum and maximum marks ( if it is don't add any fluid ) * according to the 2000 Ford Crown Victoria Owner Guide , MERCON automatic transmission fluid is used as the power steering fluid
Follow the wires. Have to take off the covers first.
what type of radiator fluid does a 2000 ford ranger take?
Should take 4.5 liters of oil.
On a 1989 Ford Crown Victoria : The gas tank size is ( 20 U.S. gallons ) according to my Chilton's repair manual