Want this question answered?
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
the most effective way to do so is to reduce the flow of the heat exchanger
Yes it does. As with any device, a heat exchanger is designed to work within certain parameters. If the conditions exceed these limits, the effectiveness of the heat exchanger is compromised, and my wind up not functioning at all.
The factors that are affected by number of tubes in shell and tube heat exchanger is the rate of heat transfer and flow rate.
There are different types of heat exchangers. To get an answer the type of exchanger and what type of test you want to do should be stated.
there are two type of heat exchanger in absorption refrigeration, first is liquid heat exchanger and other is gas heat exchanger.both heat exchanger function is same, to transfer heat (hot medium to cold medium) without violate second newton law of thermodynamics. liquids heat exchanger is between boiler and absorber vessel mean while gas heat exchanger between evaporator and absorber.
Heat exchanger manufacturers is an ISO 9001 certified company located in Coimbatore, Tamilnadu. The company started its functioning 2011 in, with a strong background in heat exchanger manufacturing. Our well-experienced and dedicated employees consistently thrive to serve our customers with the best heat exchanger solution. visit :: heatexchangersmanufacturers.in
The duty of a heat exchanger can be defined in an easy way as "The amount of heat exchanged from a fluid at a higher temperature to the fluid at lower temperature in unit time by a heat exchanger is called its duty"
actually there is no difference , infact condenser itself is a heat exchanger
A Teflon coating in a heat exchanger can reduce the cost of operation in two ways: 1) the coating can protect it from corrosion and deposits thus reducing the cost of upkeep 2) to a lesser extent, a Teflon coating may reduce some drag on fluid flowing through the exchanger and consequently reduce the energy costs for pumping fluids through it.
A heat exchanger.
Calorifer is a heat exchanger, with a specific of air (or other gas) preheat. Usually is directly in a Duct installed. Heat Exchanger usually is separate unit.
expension belows are used for heat exchanger to avoid thermal stress
A heat exchanger is a device that transfers heat from one fluid to the others. A condenser is simply a heat exchanger. It compresses refrigerants into a hot gas to then condense them into a liquid. Majorly condenser is used to cool the required vapor and heat exchanger is used to heat the required liquid.
hx
It's the flat, flanged cover on the front (and sometimes the rear) of a shell & tube heat exchanger.