According to the 1996 Ford F-250 owners manual : Motorcraft MERCON automatic Transmission Fluid - Ford part number : XT - 2 - QDX Ford specification : MERCON ( for the C6 / 4R70W / E4OD automatic transmissions )
Motorcraft MERCON automatic transmission fluid ( for the C6 / 4R70W / E4OD automatic transmissions ) - according to the owners manual
Every 30,000 miles
I believe that the type of fluid to use is engraved into the automatic transmission fluid level dipstick
Motorcraft MERCON ATF ( automatic transmission fluid ) according to the owners manual
If there is a regular sized oil pan in the F250, then it is 6 quarts for an automatic. Take it to a shop to have it pumped out to improve the system.?æ
CAPACITIESAutomatic Transmission, 5R110W Initial Fill..........7.5 quarts[2]Automatic Transmission, Total Fill5 speed 5R110W..........19.0 quartsHope This Helps.
You fill the transmission fluid on the 1988 F250 diesel at the dipstick of the transmission. You will need a filler funnel in order to keep spillage to a minimum.
The 1994 takes Mercon transmission fluid
You can add transmission fluid through the dipstick tube on an automatic. If it's a standard, there will be a plug on the side of the transmission. Fill it using a suction gun or pump. Fill it until it runs out.
should be a C-6
Actually , the 2000 Ford F-250 owners manual shows that Motorcraft MERCON automatic transmission fluid is used in the power steering
Where can I find a wiring diagram for a Ford 1991 F250 pickup with 5.8 liter V8 and automatic transmission with overdrive?