Many different types of sensors:
among others
Fire protection includes adequate means of egress, exit signs, exit lighting, fire doors, fire alarm and fire suppression, among other things. The extinguishing agent would preferably a "clean agent" type, such as Halon or CO2, but many places also have water-type sprinklers, in case the fire gets hot enough to trigger them.
What type of line should be stretched for exposure protection on a fully involved structure fire?
Mast System
A jockey pump is a small pump connected to a fire sprinkler system and is intended to maintain pressure in a fire protection piping system to an artificially high level so that the operation of a single fire sprinkler will cause a pressure drop which will be sensed by the fire pump automatic controller, causing the fire pump to start. The jockey pump is essentially a portion of the fire pump's control system.
Either one CAN be used. Galvanized would be preferred in an environment high in chlorine or corrosive materials. Normally though, black pipe, or carbon steel, is used for fire protection because it is much cheaper.
The answer would depend upon the local zoning, local fire code, state fire code, type of construction, type of occupancy, type of hazard, among other things.
Date of installation or last maintenance: This information is crucial for keeping track of when the fire protection system was installed or last inspected and maintained. It helps ensure that the system is up-to-date and functioning properly. Details of inspections and tests: Records should include information about routine inspections, testing, and any required repairs or maintenance performed on the system. This allows for a comprehensive overview of the system's condition and helps identify any potential issues or areas that require attention. Contact information for responsible parties: It is important to include the contact information of the individuals or companies responsible for maintaining and servicing the fire protection system. This information allows for easy communication and coordination in case of emergencies or for scheduling routine maintenance.
closed
The type of cable commonly used for fire alarm systems is called "fire-rated cable" or "plenum-rated cable." This type of cable is designed to meet the fire safety standards and building codes for fire alarm system installation. It has a fire-resistant jacket that helps prevent the spread of fire and toxic smoke in the event of a fire.
Oxygen sensor
when combustible oils/grease are used a wet pipe spirnkler system is generally recommended with a densityabout 0.25 gpm over the most remote 3000 sq. ft.
The answer depends upon a lot of other factors including what type of fire department it is and whether there are any fire hydrants nearby.