Type your answer here... asbestos
Something that is not easy to light on fire is fire resistive.
Basically non combustible and fire resistive are the same. Difference is non combustible has steel frame members that are unprotected or limited protected. Fire resistive has protected steel frame members with a fire rated material such as concrete.
What type of line should be stretched for exposure protection on a fully involved structure fire?
ISO 1 - Frame Construction (Wood walls & Roof, foundation construction does not matter) Masonry Veneer or accents still count as ISO 1. ISO 2 - Joisted Masonry - Free standing Masonry shell with wood floors and joists, flammable roof. (If structure burns, masonry walls remain) ISO 3 - Light noncombustible - Structure does not add to fire (fuel) load of building, but does not resist fire well. Light steel construction. ISO 4 - Masonry Noncombustible - Free standing masonry walls with noncombustible floors and roof. ISO 5 - Modified Fire resistive - Walls between fire devisions in structure have 1 hour fire rating. Noncombustible structure. ISO 6 - Fire Resistive - Walls between fire devisions have 2 hour fire rating, otherwise noncombustible structure.
It is a resistive type of circuit.
Yes, heat just hardens them
(I) Frame (II) Joisted Masonry (III) Non-Combustible (IV) Masonry Non-Combustible (V) Modified Fire Resistive (VI) Fire Resistive
resistive type. its booty
A: purely resistive
resistive load. I assume that the stove you are reffering is with heating coils.
Stortz connections are used to connected lengths of fire department water supply hose, or to connect a fire pumper to a structure's sprinkler and/or standpipe system. They provide a 1/4 turn 'sexless' connection, which is normally faster and easier to complete than a threaded coupling. The type of connection used to supply a structure is regulated by the fire code that applies to the jusisdiction where the structure is located. Designers and engineers should consult with their local Fire Marshal to determine the correct type of connection for their local. Using this type of connection for fire department supply hose depends on the standard operating procedures for hose in place at the fire department. Designers and engineers should conact their Fire Chief's office to determine these procedures.
It is resistive much load