What type of fluid do you use in your automatic transmission? Most of the BMW transmissions were filled with standard Dexron III fluid. Dexron is a registered trademark of General Motors Corporation and is a Transmission Fluid specification that is required for use in most 3-Series E36 BMW automatic transmissions. In fact, GM manufactured many transmissions for BMW (the 325is transmission featured in this article has a big 'GM' stamp on the side). There should be a side plate attached to the transmission that will indicate which type of fluid you should install. There also may be a sticker on the side of one of the bottom sumps. On my car I found neither, but since it was a GM transmission, I used the Dexron fluid which has worked quite well. Mixing and matching different types of transmission fluid can cause your transmission to fail. pelicanparts.com/BMW/techarticles/E36-Tranny_Fluid_Auto/E36-Tranny_Fluid_Auto.htm
You can use any SAE certified transmission fluid in your 2001 BMW automatic transmission. The automaker recommends that you never overfill the transmission fluid.
mercon III
What type of transmission fluid does my 1989 toyota pick up truck take, manual 4 speed.
The best way to confirm the type of transmission fluid to use in a 1989 Isuzu pick up is to refer to the owner manual. A retailer who sells the transmission fluid will be able to advise the correct purchase.
DEX III Transmission Fluid
It is important to maintain the fluid levels in a car, and it is important to put the right type of fluids in the car as well. A 1989 Chevy Pick up uses Dexron III transmission fluid.
Mopar ATF Plus Type 7176 automatic transmission fluid
Mercon automatic transmission fluid.
I'd suggest using a Dextron III/Mercon automatic transmission fluid.
The transmission fluid needed for the 1989 Chevrolet K1500 with a manual transmission is Synthetic Synchromesh transmission fluid (5W-30) (MTFQT). If the transmission you have is the MG5 5-speed, the capacity is 4.2 pints. If the transmission is the SM465/M20, the capacity is 8.5 pints.
80w90
ford type f or mercon fluid [you can also use dextronII but I wouldn't recommend it!!