0
What us the southward-flowing current that intercepts water outflowing from the Mediterranean Sea and then flows past the west-African coast called?
Wiki User
∙ 15y ago
Taking Dr. Jacob's test?
The answer is Canary Current
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is th prefix meaning of eff?
The prefix "eff" means out or away, like in words such as "efface" (erase) and "effluent" (outflowing).
What is the power from the sun called?
Tidal power. The easiest way to generate this is with coastal locks you close after the time comes in. The outflowing waters cause a turbine to spin, robbing the earth of angular momentum and accelerating the lunar recession rate. These numbers are extremely small, however, and the power generated quite useful, reliable, and cost effective.
What power is produced from the pull of the gravity of the moon and sun?
Tidal power. The easiest way to generate this is with coastal locks you close after the time comes in. The outflowing waters cause a turbine to spin, robbing the earth of angular momentum and accelerating the lunar recession rate. These numbers are extremely small, however, and the power generated quite useful, reliable, and cost effective.
2000 Hyundai Elantra charcoal canister?
These canisters are part of a fuel vapor system that filters outflowing air from gas tank when filled. Charcoal canister get clogged or spill charcoal to fuel lines, making difficult to fill the gas tank. The charcoal canister is located behind left rear wheel, close to the bumper. They have two hoses and an electrical conector.
What makes the Great Salt Lake very unique compared to other lakes?
Utah's Great Salt Lake is very salty, for one. It also has no outflowing tributaries. The water that flows into it, evaporates off of it. It's elevation above sea level varies by about eighteen inches each year, due to the spring thaw melt-off and the summer's evaporative occurrence.See the related link listed below for more information:
What is the job description of a saw mill operator?
The saw mill operator would have to have access to forested lands from which trees could be selected, felled, bucked, limbed, and transported to the mill. The logs may be scaled en route or at the mill, but then they are debarked. Logs are then decked and moved to the head saw. The path of travel may vary, according to what usage they have been selected for.The saw mill operator would be responsible for hiring the crew and keeping them busy, maintaining the machinery and keeping sawblades sharp, arranging for the influx of logs and the outflowing of the dimensional lumber.See more information at the related Wikipedia link listed below:
Estuarine turbidity maximum?
Strong tidal forces push salinity upriver beneath the outflowing river water. The turbulence caused by this tidal forcing results in resuspension of sediment and other particulate material present on the river bed. Concurrently, dissolved material in the river water flocculates when it comes into contact with the salt wedge pushing its way upriver. The combination of these two processes results in elevated levels of suspended particulate material: the estuarine turbidity maximum (ETM). Within the region of the ETM, material in the water column, and on the bed of the estuary, is trapped, resuspended and advected. ETMs vary in strength and distance they move with the tides depending on the strength of the tide and the flow of the river. Hope this helps!
Does God have more power than the Holy Spirit?
The answer depends upon which sect of Christianity you believe in as some consider God a trinity, while others do not.For those who consider the God Family to currently be the Father and the Son, the Father is Supreme. These believe the Holy Spirit of God, aka the Spirit of Christ, is the 'outflowing power of the God Family' that sustains Creation. An example in Scripture is Luke 1:35 with multitudes of others throughout the Bible.Christianity today looks nothing like the Church of God, Jesus established in 31 AD. Today, via man's interpretations of Scripture, it might well be called, 'the rainbow coalition of churchianity.' Some estimate there are thousands, if not tens of thousands, of varying sects and shades of beliefs/politics.
How to measure the rate of respiration in mealworm beetles?
The easiest way would probably be to measure the rate of formation of CO2 in a hermetically sealed chamber, subtract the rate of a similar chamber but without bugs (the substrate might produce some CO2 on it s own by microbial activity) and divide that by the number of mealworms present. Not a simple experiment to do at home, but not completely impossible either. Throw 100 mealworms in a bottle, no substrate, flush the bottle with CO2-free air (made by passing it through a CaOH solution first), then at T=0 use the outflowing air to precipitate CaCO3 in another bottle of CaOH solution, let it run for an hour, and weigh the resulting precipitate of CaCO3 after filtering and drying. Convert moles CaCO3 to CO2, divide result by 100 and you have the production of CO2 by 1 mealworm in an hour.
5 How does the geometry of bipolar flows and Herbig-Haro objects support the hypothesis that protostars are surrounded by rotating disks?
The geometry of bipolar flows and Herbig-Haro (HH) objects provides valuable insights into the hypothesis that protostars are surrounded by rotating disks. This hypothesis is a fundamental concept in star formation theory, and the observations of bipolar flows and HH objects help to confirm its validity. Bipolar flows: Bipolar outflows are powerful streams of gas and dust that are ejected from young protostars during their early formation stages. These flows have a distinct bipolar shape, with two opposing jets of material moving in opposite directions along the rotational axis of the protostar. The key features of bipolar flows that support the rotating disk hypothesis are as follows: Symmetry: Bipolar flows exhibit a high degree of symmetry, with the jets emerging in opposite directions along a common axis. This axis is often aligned with the rotation axis of the protostellar system. Velocity gradients: The material in the bipolar flows shows a velocity gradient, with the highest velocities at the center and decreasing velocities as you move outward from the protostar. This is consistent with the idea that material is being launched from a central rotating disk, where material closer to the center is moving faster due to the higher angular velocity. Collimation: The jets in bipolar flows are highly collimated, which suggests that the material is being channeled through a narrow opening, potentially created by the surrounding rotating disk. Herbig-Haro (HH) objects: HH objects are the bright knots and shock fronts that form when bipolar outflows collide with the surrounding interstellar medium. These objects are often observed as highly directional structures, and they provide further evidence for the presence of rotating disks around protostars: Alignment with bipolar flows: HH objects are typically aligned with the axis of the bipolar outflows. This alignment suggests a connection between the ejected material and the protostellar rotation axis. Bow shock morphology: The bow shock shape of HH objects indicates that the outflowing material is encountering resistance from the surrounding medium. This is consistent with the idea that the material is emerging from a rotating disk and is colliding with the surrounding material, creating shocks. Shock-induced emission: The collision between the outflowing material and the surrounding medium generates shocks that produce bright emission lines, often indicating the presence of high-velocity material. These emission lines provide clues about the velocities and dynamics of the material being ejected from the rotating disk. In summary, the geometry and characteristics of bipolar flows and Herbig-Haro objects strongly support the hypothesis that protostars are surrounded by rotating disks. The symmetrical bipolar shape, velocity gradients, collimation of material, alignment of HH objects with the bipolar outflows, and shock-induced emission all point toward the presence of a central rotating disk as a key component of the star formation process.
How does a ground fault circuit interrupter shuts down a circuit?
A ground fault circuit breaker detects leakage current between the hot wire coming off the breaker and the neutral/ground since the neutral is bonded to the ground in the panel, if it senses a current of 6 milliamps or more it will trip. Note: no sharing of the neutral for a circuit on a ground fault breaker If a few milliamps from the hot (black) wire do not return on the neutral (white) wire, then a GFCI assumes that current it traveling harmfully elsewhere through your body. So it disconnects. A GFCI can monitor 15,000 milliamps. But if only 5 go missing, then a GFCI trips.
Who did Jesus and god the father send to us?
John 14 and 15 speak of the time when Christ will return to Heaven. In John 14:16-20, Jesus emphasized that after His departure to be with the Father, the disciples would NOT simply be abandoned or orphaned. Rather, Jesus would ask the Father who is greater than He, to send the power of the Holy Spirit (1 John 3:24) to them so both the Father and Jesus the Son would dwell inside true Christians (John 14:20, 23). In John, the Holy Spirit is referred to the 'Comforter or Helper.' In the Greek it is parakletos which is a masculine noun requiring a masculine pronoun. It does not mean it is a person.In John 15:26 we read, "But when the Comforter is come, whom I will send unto you from the Father, even the SPIRIT OF TRUTH which proceedeth from the Father, he shall testify of me."The Holy Spirit of God imparts both understanding and strength. It flows out from God which we read above in 15:26 and connects our minds to His. God is both Spirit (John 4:24) and Holy (Leviticus 19:2; Revelation 15:4). The Holy Spirit is not some separate and distinct personality of the Godhead. Rather, the Holy Spirit is the means by which Christ and the Father make their presence felt in the hearts and minds of believers. The Apostle Paul calls this power as the Spirit of God and the Spirit of Christ (Romans 8:9). Luke refers to the Holy Spirit as God's outflowing power (Luke 1:35). It is the means by which the Word created and brought into existence the entire Universe (Psalm 104:30).
