Want this question answered?
for the most part in the cylinder head but some engines have them in the block
The axis supports the weight of the head.
In the cylinder head (top part of motor under valve cover).
The Valve is the piece that actually moves in and out, or "opens and closes" - the part of the block that the valve rests on is called the valve seat.
The head, or top part of the motor, must be removed to replace valve seals. After the head is removed take it to a machine shop and they will mill the head to make sure it is flat and also grind down the valves and replace the valve seals.
C6 is the sixth of seven cervical vertebrae in the human neck. It supports the head and articulation of the head and neck.
It is part of the EGR valve on the driver side of the rear cylinder head.
EGR valve is located between the head and battery. Its a cylindrical shaped part with a connecter going to the top of it. Its held on with 2 13mm bolts.
If you mean the hole behind the camshaft between the valve cover & the head, then you remove the valve cover, install a new plug & valve cover gasket, and reinstall the valve cover. The part number for the plug is 1336763.
The human body is made up of various tendons, muscles, and bones that all serve a different function. The head and back are supported by the spinal column which is covered by vertebrae that run from your tail to your neck.
The arm supports the body tube.
A rafter is part of a roof, it supports the roof.