There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
The ratio is on a tag on front and rear axle between 2 of the cover bolts
final axle ratio 3.55
In order to determine what axle and axle gears you have there will be a metal tag that is stamped with the gear ratio on the cover bolts and Dana has a number raised on the right bottom side where the axle tube enters the pumpkin. Between the two it will tell you what axle and ratio you have. If you have a limited slip then you axle ratio would read 3L55 instead of 3 55
largely depends on axle ratio
3.07 or 3.73 to 1. Could be either.
Yes, (in 4x4 applications the gear ratio/s match the front axle). 2 wd there is no front ratio to match.
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92
Try checking the vacuum lines on the axle.
if it is a 4 cylinder 5 speed probably 4.10 ratio.that what mine had in it but changed to 4.88
1984-1993 Jeep Cherokee XJ Rear Axle 1987-1993 Jeep Wrangler YJ Rear Axle 1986-1992 Jeep Comanche Rear Axle
what is rear end axle ratio
Check the SPID in your glove box. one of the G** Codes will be the rearend ratio G80 means you have a locking(posi) Rearend. GU2 AXLE REAR , 2.73 RATIO GU4 AXLE REAR , 3.08 RATIO GU5 AXLE REAR , 3.23 RATIO GU6 AXLE REAR , 3.42 RATIO GU7 AXLE REAR , 2.77 RATIO GU8 AXLE REAR , 3.90 RATIO GT2 AXLE REAR , 4.77 RATIO GT3 AXLE REAR , 4.55 RATIO GT4 AXLE REAR , 3.73 RATIO GT5 AXLE REAR , 4.10 RATIO Anything else, let me know, I'll look it up. (cortex454 at gmail dot com