Will vary widely depending on switch type, manufacturer, environmental conditions, current and voltage as well as the duty cycle of the switch.
No load is the least destructive load to a switch.
It's the product of the resistance of that resistive load and the current passing through it.
It is resistive much load
resistive loadAnswerIf the current is driving a motor, then the load is resistive-inductive.
The PF will increase
No, a geyser is a resistive load.
the filament is made of tunguston which is having high resistance value,Hence it's resistive load
specification of inductive load,capactive load,resistive load in laboratory
Some examples of resistive loads are: heaters, incandescent lights, fans etc.
When using a resistive load bank to test a generator, it does not matter if you load the generator to its kW or kVA rating, because those two numbers are the same when considering a resistive load. Power factor, which is the difference between true and apparent power, only comes into play when there is a reactive (inductive or capacitative) load.
the ampere i=0is theonlyedge where the e0b and e0c can come together and share the load and that way the two vector diagrams will connected and the load will be less resistive and more on the ek0 and c73 resistive load. the 38f93 relay will be the one to break the load 2u3 and e0b and e0c into diffrent components that will be drawn in the diagram.
The maximum load for resistive devices is 1800W, while for tungsten devices it is 600W. This means that devices with resistive load can safely draw up to 1800W of power, while devices with a tungsten load should not exceed 600W to prevent damage to the equipment and ensure safety.