0
What will happen if you use a 220 240 VAc 50Hz iron to 220 240 AC 60Hz?
Wiki User
∙ 15y ago
It should work with no problems, since the frequency does not affect the work or the iron heater.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Can 220v 50hz CPU computer run 220 60hz power supply?
No
Would 120 volts 60Hz power tools work on 220 volts 50Hz?
No, the extra voltage will burn them out very quickly !
How can you convert US 120V or 240V circuit into a single phase 240V circuit to use on a European appliance?
The voltage isn't a problem, you can run 220 from your house and use that to run a European appliance, the problem is whether the appliance is dependant on line HZ. European is 50HZ and US is 60HZ. If the appliance specifies 220/50HZ, it will probably give you trouble here. If it says 220V/50 or 60HZ
Is it possible to use 220volts 60hz air conditioner in India at 220 volts 50hz?
No, the air conditioner would not last long at it would be running too slow.
Why doesn't my 110v Wahl hair clippers work correctly when plugged into a power converter converting 220 v to 110 the screw on the side has no effect?
The internal working of the motor is designed for 110V/60Hz. Your stepdown converter is from 220V/50Hz to 110V/50Hz. Frequency converters from 50Hz to 60Hz are very expensive (many times the cost of a new clipper). Therefore it is better you get a clipper designed for 220V/50Hz. If you still like to put your clipper to use, then the most cost effective solution would be to get a "car inverter" that would convert 12V DC to 110V/60Hz AC.
Can you converter 220v 60hz to 220v 50hz?
yes you can, but the cost is double the convertion of voltage 110 to 220 volts. all what you need is to convert to dc then from dc back again to ac with any rate you like
Can you run a 60hz 110V motor on 50 hz 220V with a step down transformer?
NO dear we can not rotate a 110 vlolt motor on 220,but if your voltage is 110v then y can rotate it on 50hz ,no problem,but it will rotate at lower speed, ENGR. NASEER AHMED,PAKISTAN
Will a 110V 60Hz home theater system bought in the US work in Singapore which uses a 220V 50Hz by just using a voltage transformer?
Your stereo system has an internal transformer in the power supply that is designed to operate at a given frequency. If it is designed to operate at the load your stereo system will use at 50 Hz, then yes. Otherwise this transformer will overheat when connected at the wrong frequency, and will burn out. You might be lucky and the power supply may be labelled to operate at 50 or 60Hz; if not, I recommend contacting the manufacturer. A voltage transformer will convert 50Hz 220 to 50Hz 110. To change frequency, you need special equipment.
Can 220V 50Hz lighting fittings be used on 220V 60Hz power supply?
Yes. the voltages will be compatible. Though in North America it will probably be hard to find 220 volt rated lighting fittings as the common voltage rating for lighting fixtures is 120 volts.
What happened when you plugged 120 volts 60hz 7w adapter into 220 volts?
This scenario can not happen due to the different configurations of the plugs (caps) that are used for different voltages and amperages.
Can you convert 120vac 60Hz to 220vac 50Hz?
The 120 to 220 is fairly easy, if you can find a transformer with the right rating. Odds are, the closest you can get reasonably easy will get you 240 instead of 220. Usually not a problem though. But going from 60 Hz to 50 Hz is another ball game entirely, and I can't think of any gadget that would let you do that easily and inexpensively.
Is there anyway to get 120V 60Hz from a 220V 50Hz power supply?
You can purchase an inverter that accepts 220 VAC 50Hz input and produces 120 VAC 60Hz output. You can purchase an inverter that works from single phase or three phase electricity and can produce single phase or three phase output. You must specify the 120 VAC current load when choosing the inverter. You must also be sure the 220 VAC 50 Hz supply has sufficient current capacity to operate the inverter with the required 120 VAC current load. The inverter works by rectifying the 220 VAC 50 Hz input into DC energy. The inverter then uses switching solid state components to produce 120 VAC 60 Hz output from the DC energy.
