thermostat, or buildup of deposits in intake and thermostat housing
On the intake manifold, right behind the water neck housing for the top radiator hose.
Follow the upper radiator hose to where it connects with the intake manifold, (motor) in the housing the hose connects to, is the thermostat.
On a 1999 Camaro, the map sensor is located on the back of the intake manifold. The intake manifold is the series of tubing that distributes the air coming into the engine.
On the intake manifold near the thermostat housing.
intake manifold and headers or replace with 350
It is on the back of the intake manifold.
Mounted on the rear of the intake manifold (difficult to get to!).
You will need a intake manifold set and possibly a plenum gasket set.
for the 2.3L 4 cyl. motor, it sits on top of the plastic intake manifold which faces the radiator.
Yes, that is possible on some engines.
It is between the black intake tube (plastic) and the intake manifold (aluminum part on top of the engine)
Underneath the intake manifold there will be two knock sensors
No, it couldn't be the intake manifold. The only way is if it was the head gasket or the trans. cooler in the radiator. But that's only if you have an automatic transmission.
Themo switch located on the radiator Or intake manifold , that is usually runs a relay fOr the. Oolong fan
On the intake manifold at the end of the upper radiator hose.
It is on the intake manifold near the thermostat housing.
It is located underneath the intake manifold near the rear of the engine.
It is on the intake manifold near the thermostat.
The thermostat is on top of your intake manifold, on the front side. Locate the radiator hose that runs to your intake, take the hose off and the thermostat will be sitting on the manifold under the hose.
The thermostat on your 98 gmc is located in the intake manifold where the upper radiator hose connects to the intake.
ON 2002 it is on the top right side of the engine between the intake manifold and timing belt housing, will need to remove the intake manifold and radiator to replace. 4 hrs work
in the waterneck the piece that the upper radiator hose connects to the intake manifold
diferential pressure sensor intake manifold plausibility
It screws into the intake manifold next to thee thermostat housing.