Want this question answered?
you can make one out of chains, wood, and some metal, and screws
depends on the wood, nails, screws. but both are ok use
its something
Try hardware cloth, wood and screws.
Screws have a helix design, that drills into the wood, and also holds materials together.
The most common method is with one or more screws or nails. Wood screws are especially made for the purpose. But screws and nails are not the only option. They can be bolted or pinned together, for example. with a bolt
Yes, there are screws on the pellet mill that adjust to vary the compression ratio for different materials to make wood pellets.
If you are using wooden shelving then make sure you have the right wood screws and a powerful screwdriver to drive the screws in. If the shelving isn't particularly thick then use a shorter but stronger screw.
Go to a jewel or item refiner (Perion). You will need 10 tree branches or 5 firewood to make 1 prosessed wood and 1 steel plate to make screws.
Nails are driven into wood by force, and the tightness of fitting into the hole holds the material together. Screws twist into the material, and the threads of the screws bite into the wood, giving better holding power.
If you want to use a wood that is very strong so that it holds screws longer, your best bet would be to use a hard wood as opposed to a softer wood. Pine is considered a soft wood. Ash is considered a good quality hardwood.
fastener and even if it is designed to fasten wood to wood, it could also fasten sheet metal to wood.