Check connections at the blower motor, blower motor resistor and at the switch. You may find a melted connection.
Check bulbs, fuses, and check for wiring problems
my Chevy blazer power seat on my 1996 Chevy blazer isn't working
Trouble code P0339 means: Crankshaft position sensor "A" circuit intermittent
Chevy Blazer electrical problems can be caused by a brunt wire or shortage. For a proper diagnoses, contact a certified mechanic.
what does it do
I did a search on google and was surpised to find that the S10 Chevy Blazer has tons of problems. The most common seemd to be with the transfer case.
Describe the problems you are having.
Yes, it will swap right over with no problems at all. Its the exact same.
There are several things that can cause shifting problems in your 1989 Chevrolet Blazer transmission. The most common cause of shifting problems is a lack of transmission fluid. Broken shifting forks can also cause transmission shifting problems.
multi switch on steering coloum is wearing out
check ground first
It would bolt in but you would have fuel injection problems.
Replace the wiper circuit board. It went bad on both of our blazers. It isn't too expensive. Pretty easy to get to too.
The switch or wiring has an intermittent connection. Try shaking the switch knob to see if the fan turns on and off. If it does then the switch is bad.
you have an AC leak
one of the lights is not working
you may have a vacuum leak somewhere.
P235/70/R15Chevy Blazer 4WD 2DRwhat is the tallest tire i can put on this 1998 s-10 blazer without causing any problems? thank you
if the 4x4 isn't working then you need to check your transfer case. is it making any noises? or did it just stop working?
There are many things that can cause a 2000 Blazer to have hesitation problems. Some causes could be bad plugs and wires, fuel filter, or the EGR valve.
what you working on? If it's a s-blazer i think i have the answer.
Could be a blown fuse.
Check the fuse, then the bulbs, then the brake light switch.
Yes it will with no problems.