First check all fuses, there should be two: one inside the car under the dash, most commonly in drivers area; and the other is under the hood.
If your fuses are good, and you can pull the stereo, take a multi-meter and measure for 12v at the wiring harness.
Chrysler radios are notorious for having bad power switches too. These can be costly to replace.
Hope this helps.
M.
It might be a fuse, fuse box is under the steering colomn
chack for a blown fuse or fuses.
The battery has been disconnected. You will have to reenter the radio security code to reenable it.
You need to turn off the radio and then turn it back on while holding down the clock button from there use the up and down buttons to change hour then press clock again and use the up and down buttons to change the minutes then turn off the radio. When you turn the radio on again the clock should be working
if the clock is not displaying that is light bulb you can buy on eBay or at a gm dealer.
A clock radio and an alarm clock are two very similar things which provide some of the same functions however they differ in their features. An alarm clock is a basic clock which has an alarm function and a clock radio combines the use of an AM/FM radio and an alarm clock.
According to my uncle who is James Reynolds son."the alarm quit working on his wind up clock... so he rigged the key on the back of the clock to the volume knob on the radio. when the alarm started going off, the key would spin around and turn the volume up on the radio."
Set the clock and radio presets.Set the clock and radio presets.
The method to fix a broken radio on a Chrysler 300M will vary depending on the condition of the radio. If the radio is not working, it could be a simple as a fuse. Try changing the fuse to see if this may solve the problem. If the radio is still not working, it may require troubleshooting from a mechanic or car dealership to determine the root cause.
Blown fuse or failed radio.
Pour water on it.
Yes a fuse is one possible cause.
Clock & radio presets. Possibly the radio security code if the car is equipped with a security system on the radio.
after chenging batry may hyudai radio no working
Turn the radio on and press sel twice for hours and once for mins
you have a short inside your radio.
The battery has been disconnected. You will have to reenter the radio security code to reenable it.
9v and 4.25v, measured from a working transformer inside the clock radio.
Your radio operates on one fuse, so if your display wasn't working, but the radio still worked, your radio is fried. Replace it.